Welcome to our websites!
  • Double module magnetic linear motor multifunctional pick and place machine HT-E8D

    Double module magnetic linear motor multifunctional pick and place machine HT-E8D

    Advantages 1. Used in any product, cost-effective. 2. All components can be placement. 3. Produced in China; it with of high quality; fast placement; 16 nozzles and electric feeders. 4. Professional after-sales service team provides overseas service.chips,resistor,capacitor,IC,shaped components etc. Technical parameter Number of Heads 16 Alignment Vision for the Flight Identification,Mark correction   Drive Motor High-end magnetic linear motor + Servo Motor Max Placement Rate 80...
  • Multifunctional Pick and Place Machine

    Multifunctional Pick and Place Machine

    Technical parameter Number of Heads 16 Max Placement Rate 80000CPH Max Tape Feeder Capacity 40 PCB Length Width Max:12000*300mm Min:100*100mm Component Range Smallest Size 0402   Max Height 36mm Length 3150MM Width 2250MM Height 1650MM Total Weight 2000KG The machine is introduced 1.This is multifunctional machine HT-E8D with double module,total 16 head,each part 8 head, can produce two types of products at the same time. 2.The X axis is magnetic liner motor,Y axi...
  • Single module magnetic linear motor multifunctional pick and place machine HT-E5S

    Single module magnetic linear motor multifunctional pick and place machine HT-E5S

    Technical parameter Length*Width*Height 1650*1200*1570mm Total Weight 1200kg PCB Length Width Max:500*350mm Min:100*100mm Mounting Precision ±0.02mm ,Vision alignment, Mark vision Mounting speed 40000 CPH Components LED,resistor,capacitors,shaped components,etc. power/power consumption 380AC,50Hz/ 4kw No.of Feeders Station 30PCS No.of nozzles 8PCS Our Advantages Prompt Reply Quotations will be immediately sent to you upon receipt of your specific enquiry. Favorable Price...
  • Double module magnetic linear motor multifunctional pick and place machine HT-E5D

    Double module magnetic linear motor multifunctional pick and place machine HT-E5D

    Product description HT-E5D features 16 simultaneous pick-up heads, has been designed for ease of use, efficiency, cost effectiveness and increased expandability and compatibility. with double module, can produce two types of products at the same time. The X axis is magnetic liner motor,Y axis and Z axis is servo motor,very good performance and high accuracy.It's intelligent,can produce different types of LED light and electric board,such as tube,bulb,strip,panel,downlight,streetlight,power,dr...
  • Automatic high speed dispenser HT-D12

    Automatic high speed dispenser HT-D12

    Features 1) English interface option , easy to operate 2) CCD positioning system , visual positioning compensation automatically , correct the deviation of PCB 3) Large size track , suitalbe for different size of PCB 4) Contactless high speed injection dispensing head , dispensing glue continously with high efficiency 5) Intelligent dispensing head ensure good performance , high efficiency and lower glue wasting Technical parameter Model HT-D12 Dimension length 1800mm Width 1050mm ...
  • High speed pick and place machine

    High speed pick and place machine

    product details Price: $ 95,000 /unit Customization: According to customer needs. HT-X9 is dual-arm magnetic levitation LED high speed pick and place machine.the capacity reach 200000CPH.It is Suitable for 0.5M,1M Strip, Tube and Panel Light.it can mount LED 3014/3020/3528/5050 and resistor,capacitors,bridge rectifiers,etc. technical parameter Model number HT-X9 Dimension 2450*2100*1550mm PCB size 250mm*any length PCB thickness 0.5~1.5mm PCB clamping adjustable pressure p...
  • New economic middle speed multifunctional SMT machine

    New economic middle speed multifunctional SMT machine

    Product details Modal:RT-1 Price: $33,000.00/unit Rt-1 is a single-module multifunctional mounting machine with a capacity of 30000CPH~35000CPH. The components that can be mounted include LED3014/3020/3528/5050, capacitors, resistors, IC and special-shaped components.it applies to LED light and electric board. technical parameter Place of origin Guangdong,China Model number RT-1 dimension 1104*1584*1655 PCB size 50*50~400*350 PCB thickness 0.1~6mm Mounting speed 3...
  • Pick and place machine-professional for LED display,capacity reach 150000CPH

    Pick and place machine-professional for LED display,capacity reach 150000CPH

    Product details Modal:HT-F8 Price: $70,000.00/unit Components: LED2121/2727/3528/5050 and resistor,capacitors,bridge rectifiers,etc. Application:LED display technical parameter: Model number HT-F8 Dimension 1600*1900*1550mm PCB size 80*110~345*600mm PCB thickness 0.5~5mm mounting mode group to take and group to mount system windows 7 display LED monitor input device keyboard,mouse NO.of camera 5 sets of imported camera mounting precision ±0.02mm ...
  • Magnetic levitation high speed mounter for unlimited length flexible strip(no wire),capacity reach 200000CPH

    Magnetic levitation high speed mounter for unlimited length flexible strip(no wire),capacity reach 200000CPH

    Product details Price: $ 95,000 /unit Customization: According to customer needs. Components: LED3014/3020/3528/5050 and resistor,capacitors,bridge rectifiers,etc. Application:5m,50m or any length of flexible strip and roll to roll;RGB technical parameter: Model number HT-T9 Dimension 2450*2100*1550mm PCB size 250mm*any length PCB thickness 0.5~1.5mm PCB clamping adjustable pressure pneumatic mounting mode group to take and group to mount system windows 7 displ...
  • Dual-arm magnetic levitation LED high speed pick and place machine, capacity reach 200000CPH

    Dual-arm magnetic levitation LED high speed pick and place machine, capacity reach 200000CPH

    Product details Price: $80000/unit Customization: According to customer needs. Producing with 2~4 types of materials with capacity at same time, available for 5m,50m or any length of flexible strip and roll to roll. Dual-arm four modules with 16 nozzles for each mounting part, and part A/B/C/D can be mounted separately or synchronously. Calibration automatically, high precision,available for RGB. Group to take and group to mount. technical parameter Model number HT-F9 Dimension 27...
  • Single-mode magnetic linear motor multifunctional pick and place machine

    Single-mode magnetic linear motor multifunctional pick and place machine

    1.product details Price: $43000/unit Customization: According to customer needs. HT-E8S machine is single module multifunctional mounter with high capacity of 40000CPH. It can mount capacitors,resistors,LED3014/3020/3528/5050,IC and shaped components. It applies to power driver,electric board,lens,linear bulb,household appliance and etc. X、Y、Z drive way is high-end magnetic linear motor+servo motor. Install 2 camera and adopt vision for the flight identification, mark correction. PCB clamp...
  • magnetic linear motor multifunctional pick and place machine

    magnetic linear motor multifunctional pick and place machine

    product details Price: $43000/unit Customization: According to customer needs. HT-E5s machine is single module multifunctional mounter with high capacity of 40000CPH. It can mount capacitors,resistors,LED3014/3020/3528/5050,IC and shaped components. It applies to power driver,electric board,lens,linear bulb,household appliance and etc.   Technical parameter & Product features Product parts Packing & shipping Packing details: vacuum packing and wooden case Shipping:  Shenzhen p...
  • double-module magnetic linear motor multifunctional pick and place machine

    double-module magnetic linear motor multifunctional pick and place machine

    product details Price:  $ 80000/unit Customization:  According to customer needs. HT-E8D machine is Dual system,dual module multifunctional mounter with high capacity of 80000CPH. It can mount capacitors,resistors,LED3014/3020/3528/5050,IC and shaped components. It applies to power driver,electric board,lens,linear bulb,household appliance and etc. Application example: technical parameter Product Features X、Y、Z drive way is high-end magnetic linear motor+servo motor. Install 4 camera an...
  • double-module magnetic linear motor multifunctional pick and place machine

    double-module magnetic linear motor multifunctional pick and place machine

    1.Product details Price: $75000/unit Customization: According to customer needs. HT-E5D machine is Dual system,dual module multifunctional mounter with high capacity of 80000CPH. It can mount capacitors,resistors,LED3014/3020/3528/5050,IC and shaped components. It applies to power driver,electric board,lens,linear bulb,household appliance and etc. technical parameter Place of origin Guangdong,China Model number HT-E5D dimension 1650*2000*1550 PCB size 100*100~500*300 PCB ...
  • Automatic glue dispenser machine

    Automatic glue dispenser machine

    1.Product details Modal:HT-D12 Price: $ 25,000.00/unit   2.technical parameter Model number HT-D12 Dimension 1800*1050*1550mm PCB size 1200*500mm PCB clamping Adjustable pressure pneumatic system windows 7 display LED monitor input device keyboard,mouse NO.of camera 1 sets of industrial camera Heating temperature 200℃ CCD resolution 0.01mm Running accuracy 0.001mm Dispensing height 90000CPH operating environment 23℃±3℃ power 220AC 50HZ ...
  • LED ,SMT Reflow Oven For PCB , PCB Computer Chips Welding Machine Air Wave Station Led Soldering Oven

    LED ,SMT Reflow Oven For PCB , PCB Computer Chips Welding Machine Air Wave Station Led Soldering Oven

    1.Features: ■ Windows operation interface, designed two kinds of control mode, computer control and emergency manual control,have the functions of security. ■ Adopting heating mode of the world top German technology, high heat transfer rate. The same temperature setting can reach more than 15% higher than the similar models of production capacity.The same capacity can be realized is lower than the similar machines of 15-20℃ further reduce the hot components on the PCB board and micro-damage. ...
  • Large Smt Reflow Oven PCB Soldering Machine Smt Reflow Oven For LED Producti

    Large Smt Reflow Oven PCB Soldering Machine Smt Reflow Oven For LED Producti

    1.Features: ■ Adopting imported high temperature motors,speed by Inverter control,long-term use,quality and stability; ■ Built-in cooled,two cooling centers,excellent cooling effect; ■ Cooling gases forced discharged,air-conditioned environment,environmental protection and power saving; ■ Since temperature curve for testing features(3-channel temperature measurement system); ■ Configuration of network rail transfer system; ■ Cover the heating zones can be automatically opened,easy to mai...
  • Reflow Soldering Oven Machine Infrared Reflow Soldering Oven/Reflow Soldering Oven SMT Hot Air Convection 8 Heating Zone

    Reflow Soldering Oven Machine Infrared Reflow Soldering Oven/Reflow Soldering Oven SMT Hot Air Convection 8 Heating Zone

     1.Features: 8 zones LED lead-free reflow oven ET-R8 ■ Windows operation interface, designed two kinds of control mode, computer control and emergency manual control,have the functions of security. ■ Adopting heating mode of the world top German technology, high heat transfer rate. The same temperature setting can reach more than 15% higher than the similar models of production capacity.The same capacity can be realized is lower than the similar machines of 15-20℃ further reduce the hot compo...